Manners Composite stocks
PRS, ELR or NRL Hunter Series – Manners has the ultimate stock for your chosen discipline
When designing your custom rifle, you don’t want to fall short on the most intimate part of the build — the stock.
Wraparound Shell
MCS take pride in their wraparound carbon fiber shell. Using a unique manufacturing process, it provides both strength and elegant cosmetics. This is achieved by wrapping the carbon shell around corners and into the tips. To ensure our stocks stand up to any punishment, Manners use a proprietary heavy fill in high-stress areas and a lightweight fill elsewhere. Manners have built a reputation for building the toughest stocks on the market.
Molded-In Finish
MCS offers molded-in color finishes at no extra cost. With the finish as durable as the stock itself, you can count on the stock holding up to whatever you throw at it. A Manners stock will always look as good after the hunt as it did before!
Molded-In Textured Grip
Texture is molded into the shell. The texture will not wear off and let that important shot slip through your hands! Without being overly aggressive, this texture lets you maintain a solid purchase on the stock whether it’s wet or dry, hot or cold. If you choose to wear gloves this texture won’t be “sticky.”
Molded-In Bolt Handle Notch
To maintain maximum strength, Manners incorporate a molded-in bolt handle notch on select models. Additionally, we work with all popular bolts. This allows you to have a clean cut while keeping full integrity of the carbon shell. Why cut away strength when you can mold it in!
Bipod Provisions
On select models, MCS provides solid mounting points with the ability to easily swap to other platforms. Each stock will come set up with your chosen mount but the top side will have provisions for other popular choices. Sling stud, Atlas BT-15/BT-17, and Area 419 mounts are 99% set up. All you have to do is drill through the shell using the pilot hole, set the weld nut into the slot, tighten down, and you’re ready for the range!
NEW for 20024
MCS-NS
A quickly deployable butt system adjusts from 11.25” to 14.5” with one push of a button, giving you a choice of 9 rock-solid positions. The MCS-NS features a unique EFR mounting rail system that is molded into the shell of the stock.
Comes standard with a 7.5” arca mount which is recessed into the stock just ahead of the magazine area.
The NS is also equipped with an MCS original zero-exposure bipod rail with a snag-free design. This is a dual compatibility rail with a machined-in flush cup.
Optional EFR Bridge with machined-in top picatinny rail for night optics of your choice. Additionally included is a picatinny side rail that can be attached either right or left.
Tactical Stocks
T2A-Gap
The T2A-Gap is adjustable cheek version of the T2, redesigned for optimal comfort and precision. The bottom is smooth and flat from the front of the trigger guard to the tip of the fore-end. This creates a very wide, flat area in front of the trigger guard. This, along with a thumb shelf, provides added stability on barricades.
MCS-T4 TEAM
The MCS-T4 TEAM comes standard with a fixed 1″ Pachmyer Decelerator pad. Optional butt spacer system and a 1/2″ Pachmyer Decelerator pad .
The standard weight for the T4 is 2.8 lbs.
The fore-end is about 2.50” wide and will take barrels up to 1.350 inches in diameter. The sides and bottom of the fore-end and the bottom of the butt behind the hook are parallel with the bore. This allows the stock to ride very straight and true if you want to use bags. The fore-end of the stock is only textured on the back half and the pistol grip is about 1/4″ longer compared to the T2 stock.
MCS-T5A
A lot of time went into the design of the grip on this stock, it moves your hand down and forward so your trigger finger is in a more natural position so you are not having to reach for the trigger. The area behind the trigger is designed to make your hand return to the same spot each time you grip the stock.
The T5A comes standard with a fixed 1″ Pachmyer Decelerator pad. Optional butt spacer system and a 1/2″ Decelerator pad .
The standard weight for the T5A is 4.0 lbs.
The fore-end is 2.40” wide at the tip and will take barrels up to 1.350 inches in diameter
Hunting Stocks
MCS-LRH
The new MCS-LRH stock was developed for the modern hunting enthusiast looking for the ultimate light weight adjustable hunting stock. For that reason, this is the perfect platform to start that dream precision hunting build or for competitors to build that light weight competition gun for the new long range precision matches.
It comes standard with a 3.5” long arca rail. A full-length ARCA rail is now available as an optional upgrade on the MCS-LRH. Additionally, the rail may also be purchased separately to install on your existing LRH.
MCS-T
The MCS-T is a more traditional hunting/tactical stock. This fixed-cheek stock has a standard weight is 2.5 lbs but with the Elite Tac 100% carbon fiber option is usually around 28-30oz. The fore-end is 1.75 inches wide at the tip and rounded to a flat beaver tail.
This stock has a high cheekpiece for the bigger bell scopes and a nice palm swell. The fore-end and palm swell feature a molded in textured surface for a sure grip.
Many more options available - get in touch to find out more